Ziehm Imaging, Inc. Vision Installation Manual MAN 06-0015, Rev. A Page 11
Maintenance Report: Labels
3. Inspect the generator and skin cone. Verify that the certification and warning
labels are present and legible. Record the model number and serial number in the
box below. If labels are required, contact Ziehm Service department.
Laser label (Optional)
Systems equipped with a laser alignment device have the additional labels shown in
Figure 2.
DICOM label (Optional)
Systems equipped with DICOM connectivity have additionally either label 26 or label
27.
Model No. Serial No.
Certification label
To Next Page
Loading...