To Next PageTo Next Page
Need help?Do you have a question about the ZIMO MN180N18 and is the answer not in the manual?
General| Category | Media Converter |
|---|---|
| Manufacturer | ZIMO |
| Model | MN180N18 |
| Data Rate | 10/100/1000Mbps |
| Operating Temperature | -40°C to +85°C |
| Storage Temperature | -40°C to +85°C |
| Humidity | 5% to 95% (non-condensing) |
Detailed steps for updating decoder software and loading sound projects.
Information on the decoder's protection mechanisms against overload and overheating.
How to set and manage vehicle addresses in DCC, including short and extended modes.
Settings and behavior for operating decoders in analog mode.
Parameters for adjusting motor control, speed curves, and regulation behavior.
How to configure locomotive acceleration and deceleration timing.
Procedure for achieving controlled stops at a set distance.
Functions for shunting, half-speed operation, and momentum deactivation.
Mapping function keys to specific outputs according to NMRA standards.
Suppressing specific lights based on direction or other conditions.
Controlling light brightness and implementing direction-dependent lighting effects.
Setting up and configuring flashing effects for locomotive lighting.
Assigning various effects like lighting, smoke, and uncouplers to function outputs.
Setting up and configuring smoke generators for steam and diesel engines.
Explanation of RailCom technology and its role in bidirectional DCC communication.
Introduction to ZIMO scripts for creating programmable sequences within the ZSP software.
