Settings
Resetting the Door Knob
Remove the screw and cover from the interior assembly.
Press and hold the Reset Button until you hear a long beep sound
along with the green light, and then the door knob will reboot itself
until you hear another long beep sound along with green light,
indicating the reset is successful.
Passage Mode
Anti Prying
The anti-prying technology is used for protecting your passcode
from prying eyes. You may enter up to 20 digits including your
passcode to unlock the door knob.
Turn on passage mode, the door will stay unlocked until you turn it off.
*Turn on passage mode
Turn off
passage mode
Standard Settings Shortcut
*Once succeeded, green light stays for a while along with a long beep.
Press any key to
deactivate passage
mode while it is on
admin. passcode>
>
admin. passcode >
> Press and
hold for 5s
> 4 >
18
To Next Page