ZINCKER VAULTA K1 - Account management; Administrator Passcode Management; User Passcode Management; Clear all users

Account management
Administrator Passcode
Default administrator passcode is ‘123456’. If you wish to set a new
passcode, it should be 4-8 digits. Make sure to set a new code as
soon as you finish installing the lock.
Change Administrator Passcode
> admin. passcode > > 1 > > new passcode > >
new passcode (confirm) >
Add a User Passcode
Change a User Passcode
Delete a User Passcode
Clear all users
> admin. passcode > > 3 > > old passcode >
> admin. passcode > > 99 > >99>
> admin. passcode > > 2 > > old passcode > >
new passcode > > new passcode (confirm) >
> old passcode > > 0 > > new passcode > >
new passcode (confirm) >
17