16
WARNING
ALWAYS ensure that the joystick On/Off switch is in the Off position prior to
performing any maintenance, adjustment, or service.
ALWAYS have a qualified technician perform battery installations/removal – this
is highly recommended by Zip’r Mobility.
ALWAYS wash hands after handling batteries. Battery posts, terminals, and
related accessories contain lead and lead compounds.
NEVER allow any of your tools and/or battery cables to contact both battery
terminal(s)/post(s) at the same time. An electrical short may occur and serious
personal injury or damage may occur. Always wear rubber gloves when
installing/removing batteries.
REMOVING/INSTALLING BATTERIES
REQUIRED
BATTERIES AND CHARGING
Step 1:
Remove the joy stick controller from the seat
arm and then remove vinyl seat and the
chrome seat post from the Zip’r PC.
Step 2:
Twist the two chrome release levers so
that they are pointing forward.
To Next Page
Loading...
Need help?
General