Zip'r PC User Manual

23
Lock Mode
The VSI has a feature that enables you to lock your PC to prevent unauthorized
use.
Locking your PC VSI Controller
1. With the VSI switched on, press and hold the on/off button. After 1 second,
the VSI should beep.
2. Release the on/off button.
3. Push the joystick to the full forward position until the VSI beeps.
4. Pull the joystick to the full rearward position until the VSI beeps.
5. Release the joystick. There will be a long beep.
6. The VSI is now locked.
Unlocking your PC VSI Controller
1. Press the on/off key and power on the VSI. The maximum speed indicator
should move from side to side.
2. Push the joystick to the full forward position until the VSI beeps.
3. Pull the joystick to the full rearward position until the VSI beeps.
4. Release the joystick. There should be a long beep.
5. The VSI is now unlocked.
ZIP'R PC OPERATIONS CONTINUED

Zip'r PC Specifications

General

Weight Capacity	300 lbs
Overall Length	40 inches
Seat Width	18 inches
Type	Power Wheelchair
Battery	24V