Zipforce Slim - Fitting the Wireless Pedal Sensor

23 pages

To Next Page

To Previous Page

The PAS sensor can be tted in various places on your bike, but for some ttings you need

to change the settings to “PAS reverse” in the app.

Fitting the PAS sensor can be carried out on:

• Inside of left crank arm.

• Outside of left crank arm (switch to PAS reverse).

• Inside of right crank arm (switch to PAS reverse).

• Outside of right crank arm.

1. Place the PAS sensor on the crank arm.

2. Fasten with the supplied strap.

FITTING THE WIRELESS PEDAL SENSOR

1. 2.