Zipp ZM2 - Driver Cleaning (Optional) - Leaf Spring Driver

28Driver Cleaning (optional) - Leaf Spring Driver
Driver Cleaning (optional) - Leaf Spring Driver
NOTICE
Service of an 11 speed driver is identical to the XDR driver service shown below.
Inspect the rubber seal for damage. If the seal is damaged, replace the
driver.
Use a small flat blade screwdriver to lift the snap ring from the driver.
Use a pick or needle-nose pliers to remove the pawls and leaf springs
from the driver.
Using a grease syringe, apply a small amount of SRAM Butter grease to
the pawl slots.
1
2
Flat Head Screwdriver
3
Needle-nose Pliers Pick
4
SRAM Butter Grease