Need help?Do you have a question about the Ziton ZP1-X3 and is the answer not in the manual?
General| Brand | Ziton |
|---|---|
| Model | ZP1-X3 |
| Category | Control Panel |
| Language | English |
Explains types of advisory messages (WARNING, Caution, Note) used in the document.
States UTCFS's liability limitations for product use and installation.
Introduces the control panel interface, operator controls, and indicators.
Refers to Figure 1 which illustrates the control panel's front layout.
Presents a detailed diagram of the control panel with numbered components.
Details controls like Zone buttons, Supply LED, General Fault LED, etc., with their color and function.
Describes how fire alarms in non-extinguishing zones are indicated.
Explains conditions for preactivation state and its LED indications.
Describes how prevented extinguishing events are indicated.
Details the "in delay to release" state and its LED indications.
Describes the state when the extinguishing agent is released.
Explains how faults are indicated and the role of the buzzer.
Details how various disablements are indicated by LEDs.
Lists how various system tests are indicated by LEDs.
Explains the conditions and LED indications for the panel being out of service.
Describes different user access levels (Public, Operator) and their privileges.
Lists tasks performable by public users, like acknowledging events.
Explains how to reset the panel and the conditions for the Reset button being disabled.
Details how to use the Fire Sounders Start/Stop button and its LED indications.
Explains how to stop/restart extinguishing sounders.
Describes how to disable/enable fire and extinguishing sounders.
Explains how to test sounders and their indications.
Describes how to disable/enable fire routing.
Explains how to test fire routing.
Describes how to disable/enable a zone.
Explains how to test a zone and its indications.
Describes how to disable/enable the extinguishing event.
Lists devices that can be disabled and the procedure.
Mentions testing input and output devices via tables.
Explains how to switch between manual-only and automatic-manual modes.
Outlines tasks for quarterly inspection of the system.
Describes tasks for annual inspection of the system and its components.
Provides instructions for cleaning the control panel.
Lists EN standards relevant to fire control panels.
Lists EN standards for electrical safety and EMC.
To Next Page
