ziva ST2 HYPER EXTENSION BENCH - Maintenance

3
BEFORE YOU BEGIN
MAINTENANCE
Thank you for selecting the new ZIVA™ ST2 Hyper Extension Bench . For your benefit, read this manual
carefully before using this product. If you have questions after reading this manual, please
see the back cover of this manual. To help us assist you, note the product model number and
serial number before contacting us. The model number and the location of the serial number
decal are shown on the front cover of this manual.
Keep all parts properly tightened .To maintain the warranty, use only ZIVA parts for repair or replacement.
If there are any questions or concerns,see HOW TO CONTACT CUSTOMER CARE on the front cover of this
manual.Clean this product using a soft cloth dampened with warm water and mild soap. If necessary,
use a soft bristle brush with the cleaning solution. Then, rinse the product using a soft cloth dampened
with clean water,and thoroughly dry it.
Description Daily Monthly Yearly
It is recommended to
cleaning the machine daily
√
Visual inspection of all
bolts and moving parts
√
Safety inspection head
cushion, seat cushion, back
cushion
√
The stability inspection
machine mats
√
Check all the bolts and
tighten
√
Yearly inspection to check
machine is fit for use
√