ZK Technology F708 - Page 25

70
Place your finger on the sensor for a full 2 seconds.
After the F707/708 scans your fingerprint successfully, it will “beep” and
then prompt you briefly
with;
New Enroll
00001-1
Remove Finger
ESC/Exit
Then you’ll be prompted;
New Enroll
00001-1
Second Press
ESC/Exit
Remove your finger, and then place your finger on the sensor a 2
nd
time.
Again, you’ll be prompted briefly;
New Enroll
00001-1
Remove Finger
ESC/Exit