ZKTeco EC16 Quick Start Guide

3. Assign elevator control levels group
1) Click Elevator > Elevator Control Rule > Elevator Levels to enter the setting interface.
2) Click New to add a new elevator control level group.
3) Enter the level name, time zones and setting area, then click OK to confirm and exit.
4) After adding successfully, check the levels group.
5) Click Add Floor icon to add the selected floor to the levels group.
6) The added floors will be displayed in the Floor list on the right.
1
2
3
4 5
6
9

ZKTeco EC16 Specifications

General

Brand	ZKTeco
Model	EC16
Category	Computer Hardware
Language	English