Need help?Do you have a question about the ZKTeco GL300 and is the answer not in the manual?
General| Type | Fingerprint Door Lock |
|---|---|
| Power Supply | 4 AA Batteries |
| Voltage | 6V (4 AA Batteries) |
| Backset | 60mm |
| Unlock Mode | Fingerprint, Card, PIN, Mechanical Key |
| User Capacity | 100 (Fingerprint, Password, Card) |
| Working Humidity | 20% |
Ensures safe operation by outlining environmental and power-related precautions.
Details the identification and function of physical components of the GL300 lock.
Explains how to use random digits before or after the correct password for enhanced security.
Resets the lock to factory defaults, erasing all stored data and configurations.
Describes the mode that keeps the lock permanently in an unlocked state.
Informs about the low battery notification and operational restrictions.
Covers automatic power-off timer and the method to wake up the lock keypad.
Provides steps for authenticating the administrator before accessing advanced functions.
Guides on how to change administrator credentials like password, card, or fingerprint.
Step-by-step instructions for adding new users and their verification methods.
Outlines the process for removing users and their associated data from the system.
Details various lock modes including single key, double keys, and double users.
Explains how to adjust the operational sound volume of the lock.
Provides instructions on how to set and configure the lock's internal time.
Covers the procedure for pairing and operating the remote control device.
To Next Page
