ZKTeco MB10-VL Installation Guide

Attach the mounting template sticker to
the wall, and drill holes according to the
mounting paper.
Fix the back plate on the wall using wall
mounting screws.
After passing the wires through the wiring hole and
connecting them to the device, and then attach the
device to the back plate from top to bottom.
Fasten the device to the back plate with
a security screw.
Copyright © 2020 ZKTECO CO., LTD. All rights reserved.
ZKTeco Industrial Park, No. 32, Industrial Road, Tangxia Town, Dongguan, China.
Phone: +86 769 - 82109991 Fax: +86 755 - 89602394
ZKTECO CO.,LTD. www.zkteco.com
MB10-VL Installation Guide
1.1m
Baseline
How to install the device?
1 2
3
4
Version: 1.1

ZKTeco MB10-VL Specifications

General

Display	2.8-inch TFT Screen
Logs Capacity	100, 000
Communication	TCP/IP, USB Host
Operating Temperature	0°C to 45°C
Operating Humidity	20% to 80%
Matching Mode	1:N
Security Level	High
Standard Functions	DST
Optional Functions	ID Card
Verification Speed	≤1 second
Power Supply	12V DC