ZKTeco X7 - Equipment Installation; Wall mount installation; Structure and Function; Access Control System Function

1
Wall mount installation
Access Control System Function:
(1)If a registered user verified, the device will
export the signal to unlock the door.
(2)Door sensor will detect the on-off state. If the
door is unexpected opened or improperly closed,
the alarm signal (digital value) will be triggered.
(3)If the device being illegally removed, the device
will export alarm signal.
(4)External exit button is supported; it is
convenient to open the door inside.
(5)External bell is supported.
1. Equipment Installation
(4)Fix the device to the back
cover.
(5)Fix the screw.
(1)Remove the screw on the
bottom of device.
(2)Take away the back cover.
(3)Fix the back cover on the wall
according to the mounting paper.
2. Structure and Function
Поставщик систем безопасности: TELECAMERA.RU