Need help?Do you have a question about the ZKTeco X7 and is the answer not in the manual?
Step-by-step instructions for wall mounting the access control device.
Details the device's role and interactions within an access control system.
Wiring diagrams and guidelines for sharing power with the electric lock.
Wiring diagrams and guidelines for using a separate power source for the lock.
Illustrates connections for exit buttons, door sensors, and alarm systems.
Specifies the required DC 12V, 500mA power supply for the device.
Step-by-step guide to authenticate the administrator.
Instructions for changing the administrator password.
Instructions for resetting the administrator password if it is lost.
Steps for registering new users' fingerprints or cards into the system.
Process for efficiently registering multiple access cards simultaneously.
Explains how users verify their identity using fingerprints, cards, or passwords.
Guide to removing individual user data from the device.
Procedure for clearing all registered user data from the system.
Instructions for configuring up to eight different passwords for door access.
Setting the length of time the door remains unlocked after successful authentication.
Selecting the primary method for user verification (e.g., FP, RF, PW).
Enabling a stealth mode where device indicators are hidden during sleep.
Defining the operational modes for the door status sensor.
General settings for enabling and managing alarm functions.
Setting up alarms for failed authentication attempts.
Enabling alarms triggered by physical device tampering or removal.
Setting a delay period for door sensor-related alarms.
To Next Page
General
