ZKTeco X7 User Manual

7
green, you can register the user again. Registered users must not be registered
again.
 Register Cards in Batches
1. The administrator
password is authenticated.
2. Press 6.
(Registering Cards in
Batches)
3. Swipe the first card once
only.
5. Cards are successfully
registered in batches.
4. Enter the total number of
cards.
6. Exit.
(The device automatically
exits the process when the
operation is completed.)
Failed.
(The indicator turns red
and makes three beeps.)
YES
Yes
Note: 1. In the process of entering the total number of cards, three-digit
numbers are automatically verified. For numbers with less than three digits,
press # to enter the verification process. Press * to reenter the total number of
cards.
2. You must clear all the registered users before registering cards in batches. IDs
of to-be-registered cards must be consecutive numbers.
1.3 User Authentication
Authenticate Users' Fingerprints/Cards/Passwords
After the device is powered on, it enters the authentication state for users to
unlock the door.
Поставщик систем безопасности: TELECAMERA.RU

ZKTeco X7 Specifications

General

Brand	ZKTeco
Model	X7
Category	Gateway
Language	English