Introduction
ZK-D3180S walk through temperature detector is a non-contact body
temperature measurement preliminary screening security gate. This
product can effectively prevent the cross-infection caused by contact
when the personnel pass through the security gate, and can conduct
temperature measurements rapidly and thus help to increase the efficacy
of disease prevention. It’s suitable for places such as government
agencies, public prosecutors' law departments, shopping malls, schools,
stations, pier, stadiums, electronics factories, hospitals, and prisons.
Important Notice about this Document
1 This manual has been checked and conrmed. If there are any printing
errors or omissions in the content, the company reserves the right of
nal interpretation.
2 If there are technical improvements to this product in the future,
without notice.
3 If the appearance and color of the product are changed, please refer
to the actual product.
4 The internal pictures are for reference only, please know!
1
2
3
5
4
8
6
9
7
1. Temperature display area
2. Beams
3. Control panel
4. Built-in probe
5. Alarm zone LED
6. Power line interface
7. Infrared temperature probe
8. Infrared sensors
9. Waterproof foot cover
Components and Dimensions
Dimensions
Quick Start Guide
Version: 1.1
Due to regular upgrades of systems and products, ZKTeco could not guarantee exact consistency between
the actual product and the written information in this manual.
Walk Through Temperature Detector: ZK-D3180S
Copyright © 2020 ZKTECO CO., LTD. All Rights Reserved.
2200mm
2010mm
710mm
820mm
580mm
16
13
10
7
4
1
17
14
11
8
5
2
18
15
12
9
6
3
Infrared distance sensor
ZKTeco Biometrics India Pvt. Ltd., Global R&D Centre
Survey No 01/01, Outer Ring Road, Mahadevpura
Bengaluru, Karnataka - 560048
Ph. : 080 68281342/48 | Sales@zkteco.in
www.zkteco.in
To Next Page
Need help?
General
