Zline DW-WM-18 Manual

11
Wash Cycles
OPERATION
3. Delay
• To delay the start of a selected cycle, press the delay start pad until the desired delay
time shows in the LED display. You can delay the start for 1 to 24 hours.
• To cancel the delay start option before the delay period is over, press the start/
cancel pad for 3-5 seconds.
4. Display Window
This displays the remaining hours and minutes of the running cycle, delay hours, error
codes, etc.
NOTE: The displays stay on during operation of each cycle.
5. Status Indicators
R - Rinse aid needs to be refilled.
P - Program end.
N - Incoming water fault; check incoming water supply
6. Options
H - Heating Dry
When the Heating Dry function is selected, the heater will work during
the dry process.
S - Sanitize
When the Sanitize function is selected, the temperature of water will be
maintained at 156.2°F max. The max temperature may not be reached
if the incoming water temperature is not correct. Certified residential
dishwashers are not intended for licensed food establishments.
NOTE: The sanitize option is available with Heavy, Normal, and ECO cycles.

Zline DW-WM-18 Specifications

General

Style	built-in dishwashers
Color	white matte, matte white
Load Capacity	16
Number of Cycles	6
Options/Settings	energy save, quick wash, normal, rinse, eco wash, heavy wash, sanitary, high temperature wash, glass, heat dry option
Drying Type	heated drying
Noise level	40 decibels adjusted
Control Type	touchpad
Delay Start	yes
Number of Racks	2
Sanitize Settings	no
Annual Energy Consumption	234 kilowatt hours
Voltage	120 volts

Weight and Dimensions

Depth	23 inches
Height	32 1/2 inches
Width	17 3/4 inches
Net Weight	73.7 pounds