Zline KB-30 User Manual

33
How to Change Parts
Replacing the Light Bulbs in Your Range Hood:
1. Remove baffles.
2. Squeeze the old LED light casting out until it falls out of the socket.
3. Disconnect the plug wires from the light wire.
7. Reconnect the LED plug into the light wire.
8. Press light assembly into the socket.
Note: Never work on or clean the range hood while power is ON. Always unplug
the unit or switch the electrical breaker to the off position.
Installation Tutorial Video

Zline KB-30 Specifications

General

Brand	Zline
Model	KB-30
Category	Ventilation Hood
Language	English