To Next Page
A
Angela DavisJul 25, 2025
Why is my Zline Ranges burner not igniting?
- CCourtney RodriguezJul 25, 2025
The gas supply valve might be in the “OFF” position, or the gas supply to your Zline Ranges range may be interrupted.
Why is my Zline Ranges burner not igniting?
The gas supply valve might be in the “OFF” position, or the gas supply to your Zline Ranges range may be interrupted.
What to do if my Zline RA36 Ranges oven light is not working properly?
If the oven light in your Zline Ranges range isn't working, try replacing or reinserting the light bulb to ensure it is not loose or defective.
What to do if my Zline RA36 oven light stays on?
Check for any obstructions in the oven door of your Zline Ranges range. Also, inspect the hinge to see if it is bent.
General| Number of Burners | 6 |
|---|---|
| Color | Stainless Steel |
| Burner Type | Sealed |
| Ignition Type | Electronic |
| Oven Type | Convection |
| Self-Cleaning | Yes |
| Width | 36 inches |
| Control Type | Knobs |
| Color Options | Black Stainless Steel |
| Warranty | 1 Year Limited |
Critical safety advice, including installation codes, grounding, and gas valve requirements.
Addresses altitude, flammable substances, and steps to take if you smell gas.
Pre-installation checks, adherence to codes, and standards for safe setup.
Details gas connection standards, regulator, and the procedure for converting gas types.
Instructions for adjusting burner flames to the desired minimum setting.
Lists common range problems and their possible causes or remedies for user assistance.
