Ice Making
Press the MENU button till the ice making symbol illuminates, then press the SELECT
button to enable the function. When the ice making function is enabled, ice maker will be
automatically operating, and the ice cubes will be accumulated in the ice tray.
Note: Prepare the water filter for use before using the ice. After connecting
the refrigerator to a water source or after replacing the water filter, fill and
discard two full containers of ice.
Water filter Replacement
The water filter symbol flashes and beeps to advise the user to replace the water filter.
After the replacement is completed, press the SELECT button for 5 seconds to reset. The set
replacement time is 130 days. To replace the water filter, search for "water filter" on
www.zlineparts.com, ZLINE's official parts distribution partner.
Celsius and Fahrenheit Selection
Press the MENU button until the Celsius and Fahrenheit selection symbol illuminates to
change between Celsius and Fahrenheit. After that press the SELECT button to confirm.
14
Models and Features
OPERATION
To Next Page
Loading...
