7. The system will begin formatting the HDD, and will automatically reboot once
the formatting is complete.
Connecting your DVR
1. Connect your analog cameras directly to the system with the correct cables as
shown. For detailed instruction, please refer to 3.2 Camera Installation.
2. Connect your display to the appropriate display input. For detailed instruction,
please refer to 3.1 DVR Installation – Connecting the Display.
3. Connect your system to a nearby power outlet with the provided power
adapter as shown.
4. Connect your USB mouse to the corresponding input as shown.
5. Connect your DVR system to your wireless router with the provided Ethernet
cable as shown.
To Next Page
Loading...
Need help?
General
