NOTE: The UPNP settings for the device are not the same as the UPNP settings
on your router and do not pose the same security risks.
NOTE*: For advanced users only. We do not recommend that you change any
settings under this page without prior networking knowledge.
Event Management
This DVR system is specialized for continuous recording, and will automatically
mark recordings that are triggered by "critical events" (motion detection and
alarms) in the playback menu. Use this menu to define "critical events" and best
optimize recording and storage on the system.
Schedule Recording
The system has two recording modes and a fully customizable recording
schedule for each camera channel.
Recording modes:
The basic recording profile will record continuously at full frames. This means
that all recorded video files will be high quality, and the HDD will be able to store
less footage at one time.
To Next Page
Loading...
Need help?
General
