Need help?Do you have a question about the Zodiac Pool Systems Baracuda MX 8 and is the answer not in the manual?
Guidelines to mitigate electrical shock risks during maintenance.
Precautions to avoid water pressure hazards when servicing equipment.
Highlights of the MX8 cleaner's performance and compatibility.
Visual identification and list of major parts of the MX8 cleaner.
Steps for preparing the pool before cleaner installation.
Procedure for connecting the cleaner via a dedicated pool line.
Steps for connecting the cleaner to the pool skimmer.
Instructions for assembling the hose and positioning the float.
Procedures for setting and adjusting the cleaner's flow rate using the gauge.
Final steps for preparing the cleaner head before pool entry.
Step-by-step guide for removing the cleaner's top cover.
Procedures for disassembling and removing the cleaner's engine assembly.
Instructions for removing the cleaner's tracks and scrubber assembly.
Steps for detaching the Direction Control Devices from the cleaner body.
Procedures for removing the wheels and their bearings from the cleaner.
Steps for reinstalling the wheels and their bearings.
Procedures for correctly attaching the DCD units to the cleaner body.
Guide for reassembling the cleaner's scrubber components.
Steps for placing and securing the cleaner's tracks onto the wheels.
Procedures for reassembling the cleaner's engine and related parts.
Final steps for attaching the cleaner's top cover.
Explanation of the cleaner's dynamic movement cycles controlled by DCDs.
Guidance for diagnosing and resolving operational problems with the cleaner.
Information on adapting a Hayward Leaf Canister using a specific adapter part.
General| Type | Suction-side pool cleaner |
|---|---|
| Drive System | Turbine-driven |
| Weight | 8.5 lbs |
| Pool Type | In-ground Pools |
| Scrubbing | Yes |
| Warranty | 1 Year Limited Warranty |
| Hose Length | 12 meters |
| Pool Surface Compatibility | Concrete, Vinyl, Fiberglass |
| Debris Type | Leaves, Dirt, Small Debris |
| Hose Diameter | 1.5 inches |
To Next Page
