To Next PageTo Next Page
Need help?Do you have a question about the Zodiac AquaLink Z4 and is the answer not in the manual?
General| Brand | Zodiac |
|---|---|
| Model | AquaLink Z4 |
| Category | Controller |
| Language | English |
Key safety warnings and precautions for installation and operation, including risks of injury and death.
Information on hyperthermia risks, effects, and precautions for vulnerable individuals using spas or hot tubs.
Detailed safety instructions for electrical connections, grounding, and GFCI requirements for safe operation.
Guidance for installers regarding drainage and a reminder to save operational instructions.
Description of the AquaLink Z4 controller's user interface, screen layout, and key components.
Explanation of the functions of the On/Off, Up/Down, Back, and Select buttons for controlling the system.
How the system displays the current operating status of equipment, alternating with the main menu.
Overview of the main menu structure for Pool/Spa and Pool Only configurations.
Instructions for activating and using Pool Mode to filter the pool and circulate water through the heater.
Enabling and disabling the pool heater, adjusting temperature set points, and operational notes.
Instructions for activating and using Spa Mode to filter the spa and circulate water through the spa heater.
Enabling and disabling the spa heater, adjusting temperature set points, and cool-down delay information.
How to turn auxiliary equipment like lights, waterfalls, or air blowers on or off manually.
Adjusting chlorine output, setting the system clock, and defining equipment schedules.
Turning on the chlorination system for 100% output for the next 24 hours.
Enabling low output mode and adjusting the minimum chlorine percentage for pool or spa water.
Adjusting the percentage of chlorine output for pool (20%) and spa (10%) settings.
Configuring the current day of the week and time, essential for scheduling equipment operations.
Setting automatic ON/OFF times for equipment like pumps, heaters, and auxiliaries.
Step-by-step guide for defining ON/OFF times and days for the filter pump schedule.
Options for creating new schedules, changing existing ones, deleting, and setting ON/OFF times and days.
Illustrative examples of setting up filter pump schedules, including new programs and existing ones.
Manually turning specific equipment like pumps, heaters, and auxiliaries ON or OFF.
Procedure to manually turn off all currently enabled equipment in the system.
Diagram illustrating the menu navigation and options for a Pool/Spa combination system.
Diagram illustrating the menu navigation and options for a Pool Only system configuration.
Definitions of system delays and lockouts such as filter pump delay, heater cool down, and cleaner lockout.
Explanation of spillover lockouts, spillover mode functionality, and enabled/disabled states.
Definitions of common system messages like 'CLEANER CANNOT BE TURNED ON' and 'FREEZE PROTECT'.
Detailed explanations for sensor errors (OPEN/SHORT) and heater/pump operational messages.
Messages related to spa mode, including cool-down cycles, timeout mode, and spillover disabled states.
