Need help?Do you have a question about the Zodiac MEDLINE 9 and is the answer not in the manual?
General| Passenger capacity | 20 |
|---|---|
| Hull material | Fiberglass |
| Engine | Outboard |
| Fuel capacity | 400 L |
| Draft | 0.60 m |
| Material | Neoprene-Hypalon |
Provides detailed technical specifications including dimensions, capacity, and design category for the boat.
Covers trailer installation recommendations, boat compatibility, and weight distribution for transport.
Explains lifting procedures, warnings, and necessary precautions for hoisting the boat.
Provides step-by-step instructions for fitting the buoyancy tube onto the boat's hull.
Explains the use of the inflator and "easy-push" valves for inflating the buoyancy tube.
Discusses buoyancy tube pressure, ambient temperature effects, and pressure loss/gain risks.
Details fuel system components, location, and warnings against specific fuel types.
Explains the function and maintenance of the water/fuel separator filter.
Provides crucial recommendations for fuel system maintenance, safety, and modifications.
Introduces the electrical system and cable routing within the boat.
Presents a comprehensive wiring diagram illustrating electrical connections throughout the boat.
Explains how to operate the circuit-breaker and its safety function.
Describes how to operate battery couplers for single and twin-engine configurations.
Details battery maintenance, installation warnings, and handling precautions.
Outlines guidelines and power limits for adding accessories to the boat's electrical system.
Details the operation of the freshwater system, including the shower and tap.
Explains the correct procedure for flushing and using the onboard toilet.
Describes methods for draining the black water tank, both at sea and when docked.
Details the various components of the boat's draining and self-bailing systems.
Explains the operation modes (automatic, off, forced) and use of the bilge pump.
Shows the locations of various labels and safety warnings on the boat.
Explains the meaning and hazards associated with different warning and caution labels.
Details the unpacking and positioning steps for installing the boat's wings.
Provides instructions for unpacking, cleaning, and bolting the aft platforms.
Guides on securing wings and installing the polyester roll bar correctly.
Step-by-step instructions for converting the aft seating area into a sun lounger.
To Next Page