EasyManua.ls Logo

Zodiac MEDLINE 7.5 User Manual

Zodiac MEDLINE 7.5
55 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Volume 2
MEDLINE 7.5
612 529 A
CAREFULLY READ THIS MANUAL BEFORE PUTTING YOUR ZODIAC INTO SERVICE.
Question and Answer IconNeed help?

Do you have a question about the Zodiac MEDLINE 7.5 and is the answer not in the manual?

Zodiac MEDLINE 7.5 Specifications

General IconGeneral
BrandZodiac
ModelMEDLINE 7.5
CategoryBoat
LanguageEnglish

Summary

I-1-TECHNICAL CHARACTERISTICS

Dimensions and Tolerances

Detailed measurements and tolerances for the boat, including length, width, and diameter.

Engine Specifications

Details recommended and maximum engine power, shaft length, and engine weight.

Design Category and Capacity

Specifies the boat's design category (e.g., B/C) and maximum load capacity in kilograms and pounds.

I-2 INVENTORY AND LOCATION

I-4-HANDLING

Lifting and Hoisting Procedures

Safety warnings and procedures for lifting the boat, emphasizing professional execution and load handling.

II-2 INSTALLING THE BUOYANCY TUBE ON THE HULL

II-3-SECURING THE PROTECTIVE FLAP

II-4 INFLATING THE BUOYANCY TUBE

Inflation Pressure and Procedure

Guidance on using the pressure gauge and the step-by-step process for inflating the buoyancy tube compartments.

II-5-PRESSURE

Pressure Management and Risks

Explains correct inflation pressures, how temperature affects pressure, and managing pressure loss and overpressure.

III - Propulsion system

IV - How to drive your boat

Starting, Operation, and Safety Rules

Step-by-step guide for starting the engine, operating controls, and essential safety precautions while underway.

Speed Limits and Maneuvering

Advises on maximum speed limits and safe maneuvering practices, especially in turns and waves.

V-1 FUEL CIRCUIT

V-2 ELECTRICAL CIRCUIT

General Wiring Diagram Overview

Visual representation of the boat's electrical system, showing component connections and wire routing.

V-3 INSTALLATION OF THE DRAINING SYSTEMS

Bilge Pump Operation and Safety

Details on bilge pump operation modes (automatic, off, forced), recommendations, and warnings about its limitations.

V-5 FIRE

V-7 ANCHORING/MOORING

V-8 BOARDING

VII-2-1 POLYESTER ROLL BAR

Related product manuals