Zodiac FUTURA MARK 3 User Manual

/ 10
F
R
A
N
C
A
I
S
1
AVERTISSEMENT
z LISEZ ATTENTIVEMENT CE MANUEL AVANT MISE EN SERVICE
DU BATEAU.
z LE MANUEL DU PROPRIETAIRE SE DIVISE EN DEUX TOMES QUI
DOIVENT ETRE CONSERVES ENSEMBLE.
NOTE :
LE MANUEL DU PROPRIETAIRE SE DIVISE EN DEUX TOMES:
- LE TOME 1
TRAITE D’UNE MANIERE GENERALE DES PRECAUTIONS
D’USAGE ET DES RECOMMANDATIONS A RESPECTER A BORD
DU BATEAU ET SUR L’EAU.
- LE TOME 2
TRAITE PLUS PARTICULIEREMENT DES CARACTERISTIQUES
TECHNIQUES ET DU MONTAGE DU BATEAU ET DE SON
EQUIPEMENT.
TOME 2
CARACTERISTIQUES TECHNIQUES - PROCEDURE DE MONTAGE
SOMMAIRE
Page Page
Ö Etapes de la mise en service du bateau 2 ÖDégonflage / pliage du bateau 10
ÖInventaire à l'ouverture de l’emballage 2
ÖMontage du bateau 3-5 ÖANNEXES
-caractéristiques techniques I – II
ÖLe système de gonflage 6 -Description générale III-IV
-Montage du sac avant V
ÖGonflage du bateau 7-8
ÖPression 9

Zodiac FUTURA MARK 3 Specifications

General

Tube diameter	0.5 m
Weight	64 kg
Type	Inflatable
Inside width	0.9 m
Material	PVC

Summary

Safety and Warnings

Read Manual Carefully

Emphasizes reading the manual before use and keeping both volumes together.

Boat Assembly Procedure

Check Contents on Unpacking

Verify all parts are present and identify them.

Inflate Main Buoyancy Tubes

Guide on partially and fully inflating the boat's main buoyancy chambers.

Assemble Floorboards

Instructions for fitting the floorboard sections into the boat.

Detailed Assembly Steps

Rigid Floorboard Installation

Specific instructions for installing the rigid floorboard components.

Stringer Assembly Instructions

How to correctly position and lock the stringers for structural support.

Inflating the Boat

Using the Pressure Gauge

Inflating Buoyancy Mechanisms

Inflation Method Cautions

Pressure Management and Risks

Recommended Pressure Settings

Specifies the correct pressure for main tubes, mechanisms, and keel.

Temperature Impact on Pressure

How ambient temperature affects internal pressure and requires adjustment.

Underpressure Risk and Correction

Overpressure Risk and Prevention

Details dangers of over-inflation and potential structural damage.

Releasing Excess Pressure