Need help?Do you have a question about the Zodiac Milpro FUTURA COMMANDO and is the answer not in the manual?
Check the contents of the boat package upon arrival to ensure all parts are present.
Details on using the WEGU and BRAVO 9 inflation pumps for inflating the boat.
Instructions for activating, closing, and deflating buoyancy tubes using I/C valves.
Information on assembling the H2P High Pressure floor with the boat.
Manual inflation process using the foot-pump and hoses.
Guidance on checking and adjusting pressure due to temperature variations.
Explains pressure loss due to temperature changes and how to top up.
Steps to take when the boat is under-inflated.
Procedures for washing and drying the boat before storage or deflation.
Step-by-step instructions for deflating and folding the boat for storage.
Guidelines for storing the boat after use, whether inflated or deflated.
Safety and handling information for SCUBA cylinders used with the boat.
Checks and maintenance for high-pressure inflation hoses.
Recommended maintenance schedule and procedures for the boat.
Procedure for performing a pressure test to check for leaks.
Explains over-inflation risks and necessary deflation steps.
Example illustrating corrected pressure test when temperatures increase.
Example illustrating corrected pressure test when temperatures remain constant.
Guidelines for safely towing the boat using appropriate D-rings and lines.
Instructions for safely hoisting the boat using lifting slings and rings.
Details on the removable slatted aluminum floorboard decking.
Information on optional aluminum floorboards for improved performance.
Instructions on how to correctly position the stringers for the aluminum floor.
Steps to connect and install the quick inflation system components.
Step-by-step guide for inflating the boat using the quick inflation system.
Procedures for reinflating chambers while the boat is in use.
Instructions to prepare the boat for automatic inflation by SCUBA.
Describes the boat inflation process for navigation readiness.
Details the installation and working procedure for the Venturi deflation system.
Provides detailed technical specifications for the boat models.
Lists and illustrates the various components and parts of the boat.
Collection of diagrams and illustrations related to boat assembly and systems.
Technical details specific to the H2P floor model.
Technical details specific to the Roll Up Floor model.
Technical details specific to the Aluminum Floor model.
Certification details and design categories for the boat.
Important notes regarding weights, measures, payload, and horsepower.
Illustrated overview of the FC 470 EVO 7 boat components.
List of boat components with English translations.
Diagrams illustrating the boat assembly process and component connections.
Additional diagrams illustrating floorboard and transom assembly details.
Further diagrams for floorboard assembly, tent formation, and stringer placement.
Illustration of inflation valve positions and pressure zones.
Diagram showing components of an inflation valve assembly.
Illustrations of intercommunication valve positions for different chambers.
Diagrams illustrating inflation setup for valves and keel.
Diagrams illustrating navigation setup for valves and keel.
Overview of the quick inflation system components and valve layout.
Diagram showing connections for SCUBA bottle to inflation system.
Details the installation and working procedure for the Venturi deflation system.
To Next Page
General