To Next PageTo Next Page
Need help?Do you have a question about the Zodiac MILPRO ERB Series and is the answer not in the manual?
General| Category | Boat |
|---|---|
| Length | Varies by model |
| Beam | Varies by model |
| Weight | Varies by model |
| Max Speed | Varies by model |
| Capacity | Varies by model |
| Engine Power | Varies by model |
| Fuel Capacity | Varies by model |
Lists the items included in the boat package for initial inventory check.
Details the components and operation of the inflation pump.
Explains the operation and maintenance of the standard inflation valve.
Describes the function and operation of the I/C valves for inflation and navigation.
Explains the purpose and handling of Overpressure (O/P) valves.
Identifies locations for connecting compressed air for quick inflation.
Step-by-step guide for installing the H2P floor into the boat.
Instructions for inflating the main buoyancy tubes to the correct pressure.
Steps for inflating the H2P floor after the buoyancy tubes are partially inflated.
Procedure for inflating the boat's keel to its operating pressure.
Overview of the quick inflation system using compressed air.
Details the components and connection of the keel inflation hose.
Information about the compressed air bottle and associated kit.
Steps for installing and connecting the quick inflation components.
Steps for using the quick inflation system and preparing for navigation.
Explains pressure control, risks of loss, and overpressure.
Procedures for topping up air in case of under pressure.
Methods for releasing excess air to prevent overpressure.
Instructions for removing and cleaning the H2P floor.
Step-by-step guide for deflating and folding the boat.
Provides detailed measurements for different boat models.
Lists load capacities and safety certifications for the boat.
Illustrates and lists all numbered components of the boat.
