Zodiac CLASSIC MARK 2 User Manual

1 /10
E
N
G
L
I
S
H
NOTE:
THE OWNER'S MANUAL IS IN TWO VOLUMES:
- VOLUME 1
DEALS WITH OPERATING PRECAUTIONS AND SAFETY
RECOMMENDATIONS THAT MUST BE OBSERVED.
- VOLUME 2
DEALS WITH TECHNICAL SPECIFICATIONS AND ASSEMBLY
PROCEDURE OF THE BOAT AND ITS EQUIPMENT.
VOLUME 2
TECHNICAL SPECIFICATIONS - ASSEMBLY PROCEDURE
ZODIAC
CLASSIC
MARK 1 - MARK 2C - MARK 2
CONTENTS
Page
Page
Assembly procedure
2
Pressure
8
Check on unpacking
2
Deflation - folding the boat
9
Assembly
3-4
APPENDIX
Inflation system
5-6
Table of technical specifications
I - II
General description
III – IV
Inflating the boat
7
Assembly of bench (option)
V
Assembly of bow bag
VI

Zodiac CLASSIC MARK 2 Specifications

General

Brand	Zodiac
Model	CLASSIC MARK 2
Category	Boat
Language	English

Summary

Assembly Procedure

Check on Unpacking

Verifies all components are present in the pack before assembly.

Floorboard Assembly

Instructions for installing the rigid floorboard sections into the boat structure.

Stringer Assembly

Details on fitting stringers to lock the floorboard and rigidify the boat.

Inflation System

Foot Pump and Valves

Explains the operation of the foot pump and how to activate standard and semi built-in valves.

Pressure Indicator

Description and usage of the pressure indicator for monitoring inflation levels.

Inflating the Boat

Inflating Buoyancy Mechanism and Keel

Step-by-step guide to inflating the buoyancy mechanism and keel, with safety warnings.

Pressure

Pressure Risks and Adjustments

Discusses risks of incorrect pressure due to temperature and how to adjust safely.

Deflating / Folding the Boat

Deflating and Stowing Procedures

Procedures for deflating the boat, removing components, and properly stowing it in bags.