To Next PageTo Next Page
Need help?Do you have a question about the Zodiac VOYAGER RE4600iQ and is the answer not in the manual?
General| Type | Robotic |
|---|---|
| Pool Type | In-ground |
| Drive System | 4-Wheel Drive |
| Remote Control | No |
| Smart Phone Control | Yes |
| Warranty | 2 years |
| Cable Length | 60 ft |
| Cleaning Cycle Time | 2.5 hours |
| Pool Size | Up to 50 feet |
| Cleaning Cycle | Floor, walls, and waterline |
To reduce the risk of electrical shock, follow specific installation and usage guidelines.
To reduce the risk of injury, do not permit children or persons with reduced physical, sensory or mental capabilities to operate this product.
Provides details on supply voltage, installed load, cable length, cleaner size, weight, filtration, and cycle lengths.
Lists the items expected in the packaging for the robotic cleaner and caddy.
Step-by-step guide to assemble the transport and storage caddy.
Instructions on how to connect the control unit to a power source safely.
Steps for installing and submerging the cleaner into the pool.
Overview of the control unit and its button functions for operating the cleaner.
How to use the Lift System to retrieve the cleaner from the pool.
Instructions on how to start, stop, and interrupt the cleaning cycle.
Instructions on downloading the iAquaLink app from the App Store or Google Play.
Steps to create an account and log in to the iAquaLink app.
Guide on setting up the iAquaLink system and connecting the cleaner to Wi-Fi.
How to start, stop, and adjust the cleaning cycle time via the iAquaLink app or Control Unit.
Instructions on selecting different cleaning modes within the iAquaLink app.
Using the Lift System for specific maintenance tasks like cleaning the filter canister.
Tips to prevent and resolve issues with the power cable becoming tangled.
How to interpret and address error messages shown in the iAquaLink app.
Accessing and managing system settings through the iAquaLink app.
Step-by-step instructions for cleaning the filter canister after each cycle.
Guidelines for cleaning and storing the cleaner when it is not in use.
Instructions on how to identify and replace worn brushes on the cleaner.
Explains flashing LED patterns and corresponding in-app error messages and solutions.
Procedures for clearing error codes from the control box or the iAquaLink app.
Addresses issues where the cleaner floats excessively or doesn't stay on the pool surface.
Troubleshooting steps for when the cleaner fails to climb pool walls.
Solutions for problems related to the cleaner not moving or starting.
Guidance on preventing and resolving cable tangling problems.
Tips to improve the cleaner's pool cleaning performance.
Diagram and explanation of how the iAquaLink app connects to the cleaner.
Steps for connecting the Control Unit and smart device to the home router.
Troubleshoots scenarios where no lights are illuminated on the control unit.
Addresses issues when the Wi-Fi functionality is turned off or not detected.
Explains what a flashing Wi-Fi indicator light signifies and how to resolve it.
Troubleshooting for a continuously flashing status light on the control unit.
Guidance for when the power LED blinks rapidly, indicating a potential issue.
