ZOJE 9610 - User Manual

Important notes for using the operation manual and parts book.

Identifies various safety symbols used in the manual.

Key operational guidelines and user responsibilities for safe machine use.

Highlights hazardous situations and necessary precautions to prevent injury.

Describes the double-needle and single-needle high-speed post-bed sewing machines.

Provides detailed technical specifications and data for models 9610 and 9620.

Explains the meaning of symbols used for notes, care, lubrication, and service.

Details the function of buttons located on the machine head, especially for -D3 models.

Describes the functions of the foot pedal and lifting levers.

Instructions for setting stitch length and swinging out the roller presser.

Steps for correctly installing the sewing machine, including safety.

Guides for setting table height and fitting the thread reel stand.

Details on installing the safety device to prevent tipping.

Initial setup, testing, and information on the tilted work base.

Step-by-step guide for inserting the needle into the 9610 model.

Instructions for needle insertion specific to the 9620 model.

Procedure for winding bobbins and adjusting primary thread tension.

Steps for removing, inserting, threading the bobbin case, and adjusting tension.

Process for threading the needle and setting thread tension on model 9610.

Process for threading the needle and setting thread tension on model 9620.

Instructions on how to adjust the stitch length setting.

Procedure for checking and adjusting the machine's air pressure.

Instructions for cleaning the air filter and routine machine cleaning.

Guide for lubricating the bevel gears.

Important notes, prerequisites, and list of tools for performing adjustments.

Adjusting needle position in sewing direction for the 9610 model.

Detailed adjustments for needle rise, hook clearance, height, and guard on model 9620.

Detailed adjustments for needle rise, hook clearance, height, and guard on model 9610.

Adjusting the height and stroke of the bobbin case opener.

Setting the correct height for the feed wheel on model 9620.

Setting the correct clearance between the presser and feed wheel.

Detailed adjustments for the roller presser's position and function.

Adjusting the retainer component specific to model 9620.

Adjusting the thread check spring for model 9610.

Adjusting the thread check springs for model 9620.

Adjusting the thread trimmer mechanism designated as -D.

Adjusting the backtacking mechanism, specifically the --D3 type.