To Next PageTo Next Page
Need help?Do you have a question about the ZOJE ZJ9600 and is the answer not in the manual?
Critical safety instructions for operating the sewing machine to prevent injury and damage.
Explains warning symbols and notes requiring special attention during use.
Steps for installing the oil tray and managing lubrication system setup.
Guides on needle installation, bobbin threading, and thread tension adjustments.
Adjusting feed distance, feed dog height, timing, and inclination.
Adjusting presser foot lifter, pressure, and pedal operation parameters.
Ensuring correct needle-hook relationship and adjusting thread take-up.
Fine-tuning pedal pressure, return force, stroke, and angle.
Adjusting thread take-up stroke and pedal pressure/stroke for optimal performance.
Parts list for the machine's main frame and external cover components.
Parts for main shaft, take-up lever, needle bar, and thread tension assemblies.
Components for the presser foot and hook drive shaft mechanisms.
Parts for the feed mechanism, lubrication system, and oil reservoir.
Parts for the thread stand and included machine accessories.
Overview of the AH21 controller and essential safety precautions for its use.
Instructions for connecting cables and configuring system settings via switches.
Setting needle position, understanding pedal control, and performing wheel-belt ratio test.
Technical specifications and installation steps for the controller and motor.
Guidance on controller operation, troubleshooting error codes, and maintenance.
General| Type | Industrial Sewing Machine |
|---|---|
| Needle System | DBx1 |
| Needle Bar Stroke | 31.8mm |
| Stitch Type | Lockstitch |
| Lubrication | Automatic |
