Zojirushi cv-dcc40 User Manual

9
■ Temperature
Conversion Guide
Fahrenheit
212
208
98
195
90
175
80
160 70
73 23
•Avoid splashing water on the Body or
Control Panel. (May cause malfunction.)
•Do not fill over the Maximum Water
Level Line. (Hot water may overflow
from the Steam Vent.)
•Do not fill the Inner Container with hot
water . (The Automatic Shut-Off function
may be activated.) (see pg.11)
•Do not fill the Inner Container with any
liquid other than water .
•Do not use water additives such as
charcoal for water purification or
mineral additives . (Small particles may
get clogged inside of the product.)
e the produ
otice the s
ic. This is n
ill gradual!
eAt your initial use or when
using the product after a long period of storage:
Attach the Filter, fill the Inner Container with water to
the MAX line and boil as directed. Once it reaches a
boil, dispense about 34 oz. (1 liter) of water and
dispose the remaining water. Fill with fresh water.
ewhen using mineral or Alkalized Ionic water:
When mineral or Alkalized Ionic water is used, a
floating residue may develop or a milky white
substance may form on the surface of the Inner
Container. This is due to the ingredients in the water
and is harmless to your health. Frequent cleaning is
recommended.
When boilin9 has completed, a melody
sounds and 1t automatically switches
to 195°F Keep Warm mode.
Time required to boil water:
CV-DCC40 Approx . 35 minutes*
CV-DCC50 Approx. 40 minutes*
(At a room temperature of 73°F with the
Inner Container filled to the Maximum
Water Level Line with water temperature
at 73°F .)
* Includes approx . 4 minutes to
Dechlorinate .
Length of time until the water
temperature reaches about 195°F:
CV-DCC40 Approx. 1 hour and 20 minutes
CV-DCC50 Approx. 1 hour
(At a room temperature of 73°F with the
Inner Container filled to the Maximum
Water Level Line .)
•The length of time for the water
temperature to reach 195 °F will vary
depending on the amount of water and
room temperature .
How to change the Information Sound
from a melody to a beep. (see pg.15)
208°F Keep Warm Mode. (see pg.12)
175°F Keep Warm Mode. (see pg.12)
160°F Keep Warm Mode. (see pg.13)
Vacuum Insulation (Non-Electric)
Keep Warm Mode . (see pg . 13)
•~Mi ♦ ------
•Add water when the water level is low
during the Keep Warm mode. (The
product automatically begins heating
the water.) If the water level is still not
high enough, it will not automatically
switch to Boil. In this case , press the
REBOIUQUICK TEMP button to
manually start the process . (see pg . 11)
•Please follow the instructions below to
reduce the risk of scalding:
• Do not cover the Steam Vent with a cloth.
• Do not touch the Steam Vent or bring
your hands or face near the Steam Vent.
• Do not open the Upper Lid while the
BOIL light is on .
•
Do not dispense hot water while it is
boiling .
elf you wish to shorten the time, add
less water to the Inner Container.

Zojirushi cv-dcc40 Specifications

General

Brand	Zojirushi
Model	cv-dcc40
Category	Boiler
Language	English