Zojirushi NS-WAC18 - Page 8

NS-WAClO/18
HOW TO USE
HOW TO SET THE CLOCK
It is important to set the clock first before cooking rice with the Timer. Although the clock is
set before shipment from the factory, certain conditions may cause it to display an
inaccurate time. If the clock is inaccurate, set the correct time as shown below.
• The clock cannot be adjusted during Cooking, Regular Keep Warm, Extended Keep
Warm and Timer Cooking settings.
e.g.: If the current time is 15:01 but displays 14:58.
I
Set the Inner Cooking Pan and plug in the Power Cord.
1) Insert the Power Cord into the Main Body securely.
2) Insert the Power Plug into an electrical outlet.
j
Press the @ button to initiate the Time Setting and adjust
the ciock to the current time.
The time display will start to blink.
©button: Each press advances the time
in 1-minute increments.
©button: Each press moves the clock in
reverse by 1 minute.
• Press and hold either button to quickly
adjust in 10-minute increments.
Adjusting time
V.
N
The time display will stop blinking after 3 seconds,
indicating the Time Setting is compieted.
If the time display still does not show the
current time, repeat Step 2 to readjust the Time correction is
time. completed
Stops blinking
V_/
Time correction is
completed
nz-n t
iZl’U I
14
SOUND SIGNALS & HOW TO CHANGE THEM
This product is equipped with a Sound Signal function, which will inform you when the Rice
Cooker begins cooking, when the Timer is set, and when cooking has completed.
You can choose the Sound Signals from the following.
Types of Sound Signals:
Types of Sound
Signals and
\^their meanings
Indication
Melody:
The default setting at
the time of purchase.
Beep:
Choose this setting if
you wish to change
from a Melody.
Silent:
Choose this setting if you
wish to disable the Sound
Signal when cooking has
completed.
Cooking has Begun: "Twinkle, Twinkle, Little Star" a beep
Timer is Set:
"Twinkle, Twinkle, Little Star"
a beep
Cooking has Completed:
"Amaryllis"
beeps 5 times no sound
HOW TO CHANGE THE SOUND SIGNAL:
1 Set the Inner Cooking Pan and plug in the • You cannot change the Sound
Power Plug. Signal during Cooking or Keep
1) Insert the Power Cord into the Main Body securely. Warm.
2) Insert the Power Plug into an electrical outlet. • If you find it difficult to
change/select the Sound Signal,
2 Hold the button for more than 3 seconds. please start over from Step 7 .
3 The setting is completed when the desired Sound Signal is heard.
WHEN CHANGING THE SOUND SIGNAL:
• Each time the TIMER button is held for more than 3 seconds, the Sound Signal will
change.
t
J
► T he selected Sound Signal is stored and will remain even if the Rice Cooker is unplugged.
Melody:
---
Beep: Silent:
It will play "Amaryllis"
when the sound setting is
completed.
It will beep 3 times when
the sound setting is
completed.
It will beep 1 time when
the sound setting is
completed.
15