Review Images in Current Exam
1. Press Current Exam (QWERTY keyboard).
2. All stored images for exam appear.
3. To view an image in large format, point with cursor and press Set key.
4. Press Current Exam to exit review & return to live imaging.
Restart Closed Exam
1. Press New Patient (QWERTY keyboard).
2. Click Restart (bottom of screen).
3. Point cursor to desired exam and press Set key.
4. Click Select Exam (bottom of screen). Next, press Exit on patient form.
5. You can now resume exam & add images to the study.
6. Press End Exam (QWERTY keyboard) to end exam.
Delete Exams from Archive
NOTE: System has limited memory; delete/transfer exams weekly.
1. Press Archive (QWERTY keyboard).
2. Point cursor to desired exam & press Set key.
3. Click Delete (bottom of screen). Select Yes to confirm. Exam is deleted from hard
drive.
1. Connect transducer(s) (cable point up).
2. Press On button (above-right of transducer connectors).
3. Press New Patient
4. Enter patient information and select Exam/Pres on this screen.
5. Press Freeze to begin imaging.
6. Press Transducer to display softkeys. Press softkey for desired transducer.
7. Press Exam Type, then select softkey for desired exam/preset.
8. Begin scanning and acquire desired image.
9. Adjust Depth.
10. Press Optimize to provide best image automatically.
11. Press Freeze to stop live scanning.
12. Use Store/Print to capture images/clips.
To Next Page
Need help?
General
