Need help?Do you have a question about the ZONARE Z.ONE PRO and is the answer not in the manual?
General| Type | Ultrasound System |
|---|---|
| Display Type | LCD |
| Display Size | 15 inches |
| Transducer Ports | 2 |
| Power Requirements | 100-240 VAC, 50/60 Hz |
| Imaging Modes | B-mode, M-mode, Color Doppler, Power Doppler |
| Portability | Portable |
| Connectivity | DICOM, USB, Ethernet |
| Application | General Imaging, Vascular, Obstetrics/Gynecology, Cardiology, Musculoskeletal |
Highlights potential hazards and precautions for system operation and servicing.
Lists electrical, environmental, and physical specifications for the z.onepro system.
Details the functions of the system's keyboard and special control keys.
Step-by-step instructions for safely removing the system from its packaging.
Procedure for installing the main module cover and initial setup.
Steps to verify correct system operation after installation.
Details how to set up imaging parameters for different transducers.
Defines information required for DICOM configuration menus.
Lists system error codes, their messages, and recommended actions.
Procedure for removing and replacing the main z.onepro system module.
Steps for removing and replacing the 17-inch display assembly.
Procedure for removing and replacing the system's battery pack.
Instructions for removing and replacing the power supply module.
Steps for removing and replacing the user interface assembly.
Procedure for removing and replacing the dock module.
Instructions for removing and replacing the gas spring mechanism.
Procedure for removing and replacing the DVD drive.
Steps for replacing the transducer TCON board.
To Next Page
