Figure 4: Removing protective storage bag
12. Locate the left front caster on the z.one
pro
and press down on the upper black tabs to release the break.
(Figure 8.2). You can leave the directional lock caster as is (right front/green)
Figure 5.1 & 8.2 : Directional and Brake release
on wheels for z.one
pro
13. Rotate the wheels from their 90 degree angled storage position, to be in line with the loading ramp and
enable rolling the system out of crate.
14. Being careful to control the system’s momentum, roll the z.one
pro
system down the ramp, and out of
crate.
To Next Page
