Figure 1: Main shipping container removal
9. Remove the clear packing tape that is used to secure the foldable wooden loading ramp in its upward-
facing shipping position. Lower the ramp on its hinges.
Figure 2: Loading ramp lowering
10. Remove the clear packing tape that secures the front support to the base during shipping. Grasp the
removable front support section of the wooden shipping base (at the bottom-front of the system), pull it
directly outwards away from the z.one
pro
system, and set aside.
Figure 3: Removable section of shipping base
11. Remove the plastic packaging bag to expose the z.onepro system.
To Next Page
