Zoom B1 FOUR User Manual

Loading batteries
1.
Open the battery compartment cover on the bottom of the product and insert 4 AA batteries.
2.
Close the battery compartment cover.
NOTE
Set the type of battery used correctly so that the amount of remaining battery charge can be shown ac-
curately. (
“Setting the type of batteries used” on page 35)
HINT
• If a dedicated AC adapter (ZOOM AD-16) is connected, it can run on AC power.
• Power for operation can also be supplied through the USB port.
ECO mode overview
• By default, ECO mode setting is ON, so the power will automatically turn off if no use occurs for 10
hours.
•
ECO mode can also be set to “OFF” on the SETTING screen. (
“Setting the ECO mode” on page 36)
9

Zoom B1 FOUR Specifications

General

Simultaneous Effects	5
Sampling Frequency	44.1 kHz
Tuner	Yes
A/D Conversion	24-bit
D/A Conversion	24-bit
Frequency Response	20 Hz - 20 kHz
Display	LCD
Input	1/4" phone jack
Output	1/4" phone jack
Expression Pedal	Yes
Inputs	1 x 1/4" (Instrument)
Outputs	1 x 1/4" (Headphones), 1 x 1/4" (Line Out)
Patches	50