Zoom B1 FOUR User Manual

Using the tuner
Use this to tune the connected bass.
Activating the tuner
1.
When using MEMORY, STOMP or EDIT mode, press and at the same time.
This activates the tuner.
HINT
Pressing anything other than
will close the tuner and return to the original screen.
Tuning a bass
1.
Play the open string that you want to tune and adjust its pitch.
The display will differ according to the selected tuner type. (
“Changing tuner settings” on page
41)
CHROMATIC tuner
The nearest note name and pitch detuning will be shown on the display and by the LEDs.
When the pitch is accurate, the LED at the center of the meter will light green and the LEDs to the left
and right will light red.
Flat In tune Sharp
39

Zoom B1 FOUR Specifications

General

Simultaneous Effects	5
Sampling Frequency	44.1 kHz
Tuner	Yes
A/D Conversion	24-bit
D/A Conversion	24-bit
Frequency Response	20 Hz - 20 kHz
Display	LCD
Input	1/4" phone jack
Output	1/4" phone jack
Expression Pedal	Yes
Inputs	1 x 1/4" (Instrument)
Outputs	1 x 1/4" (Headphones), 1 x 1/4" (Line Out)
Patches	50