Zoom B1 FOUR User Manual

4
Turning effects ON/OFF (STOMP mode)
In STOMP mode, you can use the footswitches to turn ON/OFF each of the effects
used in the patch memory.
1.
Activate STOMP mode.
• Press
.
2.
Select an effect.
• Press
.
The selection moves to the right.
Selected
3.
Turn the effect ON/OFF.
• Press
.
This turns the selected effect ON/OFF.
You can also press the – that corresponds
to an effect to turn it ON/OFF.
HINT
ON OFF
1 2 3 4 5
Effect position and number
1
23

Zoom B1 FOUR Specifications

General

Simultaneous Effects	5
Sampling Frequency	44.1 kHz
Tuner	Yes
A/D Conversion	24-bit
D/A Conversion	24-bit
Frequency Response	20 Hz - 20 kHz
Display	LCD
Input	1/4" phone jack
Output	1/4" phone jack
Expression Pedal	Yes
Inputs	1 x 1/4" (Instrument)
Outputs	1 x 1/4" (Headphones), 1 x 1/4" (Line Out)
Patches	50