Zoom B1 FOUR User Manual

5
Editing effects (EDIT mode)
In EDIT mode, you can change the effects used in a patch memory and adjust their
parameters. Select a patch memory in MEMORY mode beforehand to edit it in EDIT
mode.
1.
Activate EDIT mode.
• Press
.
Unit number
Parameters
Effect name
2.
Select an effect to edit.
• Press
– .
3.
Turn the effect ON/OFF.
• Press the same
– as in step 2 again.
OFF ON
4.
Adjust the effect parameters.
If an effect has 5 or more parameters, use to change the screen.
When the AUTO SAVE function is ON, changes to effects will be automatical-
ly saved. (
P.10)
NOTE
1
2, 3
4

Zoom B1 FOUR Specifications

General

Simultaneous Effects	5
Sampling Frequency	44.1 kHz
Tuner	Yes
A/D Conversion	24-bit
D/A Conversion	24-bit
Frequency Response	20 Hz - 20 kHz
Display	LCD
Input	1/4" phone jack
Output	1/4" phone jack
Expression Pedal	Yes
Inputs	1 x 1/4" (Instrument)
Outputs	1 x 1/4" (Headphones), 1 x 1/4" (Line Out)
Patches	50