Zoom F8 Firmware Update Guide

6
4.
Use to select “Yes” and press .
5. After the update completes, turn the power off.
NOTE
・ During the firmware update, do not turn the power off or remove the SD card. It could cause the
F8 to be unstartable.
・ In the unlikely event that a firmware update should fail, conduct the procedures from the
beginning to update the firmware again.

Zoom F8 Specifications

General

Number of Channels	8
Bit Depth	16/24-bit
Inputs	8 x XLR/TRS combo jacks
Type	Field Recorder
Timecode	Yes
USB Interface	USB 2.0
Recording Format	WAV, BWF
Sample Rate	44.1/48/88.2/96/192 kHz
Media	SD/SDHC/SDXC cards
Power	AA batteries, AC adapter
Phantom Power	+24V/+48V
Display	2.4-inch full-color backlit LCD