Zoom F8 - Names of Parts; Front and Back Panel Overview; LED Level Meter Explanation

5
The following is the same procedure for Windows and Mac.
1. Insert the SD card into the SD CARD 1 slot.
2. Install new batteries in the F8 or connect the AC adapter.
3.
Turn the power on while pressing .
NOTE
・ Always make certain that the power is off when inserting or removing a SD card. Inserting or
removing a card while the power is on could result in data loss.
・ When inserting a SD card, be sure to insert the correct end with the top side up as shown.
NOTE
・ If the SD card is loaded in the SD CARD 2 slot, eject it before updating.
②
①