Need help?Do you have a question about the Zoom Thunderboolt TAC-2 and is the answer not in the manual?
General| Category | Audio Interface |
|---|---|
| Model | TAC-2 |
| Manufacturer | Zoom |
| Audio Interface | Yes |
| Connectivity | Thunderbolt |
| Sample Rate | Up to 192 kHz |
| Bit Depth | 24-bit |
| Mic Preamps | 2 |
| Hi-Z Inputs | 1 |
| Headphone Output | Yes |
| Channels | 2-in/2-out |
| Phantom Power | Yes |
| Compatibility | Mac |
| Inputs | 2 x XLR/TRS Combo |
| Outputs | 2 x TRS |
| Driver | Core Audio |
Explains safety symbols, handling, operating environment, connection, and volume precautions.
Guides through downloading, installing the driver, connecting the device, and configuring system preferences.
Provides instructions for safely turning on the unit, including volume adjustment and connection.
Notes that the driver must be installed for the unit to power on correctly.
Explains how to select inputs and adjust gain levels, avoiding signal clipping.
Details how to select inputs and turn phantom power (+48V) on or off.
Troubleshooting steps for when the TAC-2 device cannot be selected or used.
To Next Page
