Zotac VR GO 2.0

ZOTAC VR GO 2.0
24
Setting up your ZOTAC VR GO 2.0
You need to connect peripherals before using your ZOTAC VR GO 2.0.
1 2
3 4
5
6
7
1
2
3
4
5 6
7
8
8
1
1. Connecting to USB 3.0 devices
Connect USB 3.0 devices such as external hard drives, SSDs and ash drives to the USB 3.0
port on the system rear panel.
2. Connecting to a network device
Connect one end of a network cable to the LAN port on the system rear panel and the other
End to a hub or switch.
3. Connecting to DisplayPort display
Connect the DisplayPort connector to the DP ports of the monitor or display.