EasyManua.ls Logo

ZRAY 41-2486 - Product Care, Safety & Specifications; Care, Maintenance & Storage; Safety Shut-off Features; Technical Specifications

ZRAY 41-2486
16 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
5
English
Care, maintenance and storage
Clean theproduct by wiping it with amoist cloth. Use only mild cleaning agents,
never solvents or corrosive chemicals.
Store themotor in adry and frost-free place when it is not in use. Fully charge
thebattery every third month to maintain thebattery capacity.
The overheating and fouled propeller safety shut-offs
If themotor overheats, theoverheating safety shut-off will trigger (thespeed
indicator will flash). Let themotor cool completely before switching it on again.
If thepropeller becomes fouled (thespeed indicator will flash), themotor will
automatically shut off after about 10 seconds. Clear thearea around thepropeller
and start themotor again.
Responsible disposal
This symbol indicates that theproduct should not be disposed of with
general household waste. This applies throughout theentire EU. In order
to prevent any harm to theenvironment or health hazards caused by
incorrect waste disposal, theproduct must be handed in for recycling
so that thematerial can be disposed of in aresponsible manner. When
recycling theproduct, take it to your local collection facility or contact
theplace of purchase. They will ensure that theproduct is disposed of in
anenvironmentally sound manner.
Specifications
Battery 22.2 V DC, 7.5 Ah
Motor charging time approx. 3 hours
The battery must only be charged using
thesupplied charger (GJS150-2920200)
– Input: 100−240 V AC, 50/60 Hz
– Output: 29.2 V DC, 2 A
Remote control charging time approx. 2 hours
The remote control is charged from any USB charger
using the included Micro-USB cable.
Run time at max speed approx. 60 minutes
Speed 5−7 km/h
Dimensions 54×15×13cm
Weight 3.4 kg